Technical safety operation rules for milling machine - Suzhou Industry Park Sheen Machinery Co., Ltd

Technical safety operation rules for milling machine
[Add Time] 2014-05-28 [Author] This web site [Return]

(1) before the operation handle check all parts of milling machine is normal or not, according to the provisions of lubricating oil, and low speed test run for 1~2 minutes, can operate.
(2) before the work wear overalls, women have to wear hats, wearing no gloves operation.
(3) clamping workpiece to be stable. Loading and unloading, tool, measuring, speed, fastening the mandrel and cleaning machine, must be in the machine stops.
(4) placed tools, workpiece and other debris from table.
(5) when driving, shall check the position of the workpiece and cutter is appropriate.
(6) milling machine automatic cutting, the handle and the screw to release; table can not go to the two limit positions, the limiting block shall be placed firmly.
(7) milling machine operation, no manual or cleaning machine with cotton, people can not stand in the tangent direction of the cutter, do not blow the chip with the mouth.
(8) the work table and the lifting platform before the movement, must be fixed screw loosening; don't move, tighten the nut.
(9) the knife rod, rod, chuck and tool to before starting up and tighten, not to help unload the spindle rotation.
(10) training should be closed after power supply, cleaning machine, and the handle is arranged in the vacancy, the worktable to.

Previous：Technical safety lathe operating rules
Next：Machining center status prospect